Conforming to ASME (ANSI) B73.1 Durco Mark Ⅲ process pump, Durco Mark 3 pump incorporate many proven reliability-and performance-enhancing features. They are available in a wide range of configurations, including mechanically sealed, dynamically sealed, sealless magnetically driven, low-flow, self-priming and recessed impeller. It provides flexibility and breadth of pumping solutions in countless applications.
Features:
★ Lower total cost of ownership from reverse vane impeller, which eases maintenance and provides renewable, high-efficiency performance over the pumps' life
★ Increased reliability and mechanical seal life due to the ideal seal environment seal chamber
★ Ease of maintenance resulting from optimal, predictable seal chamber pressures that are re-established after every impeller setting
★ Extended mechanical seal and bearing life through robust shaft and bearing designs that also minimize shaft deflection
★ Fast and accurate impeller setting with the industry's most innovative external impeller adjustment mechanism
★ In-shop reverse vane impeller adjustment with the only pump that takes full advantage of the back pull-out design
Specification:
ASME B73.1 pumps Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process
● Flows to 4540 m³/h (20000 gpm)
● Heads to 215 m (700 ft)
● Pressures to 27 bar (400 psi)
● Temperatures from -75 (-100F) to 370 (700F)
Size Range:
Sizes from 25 mm (1 in) to 200 mm (8 in)
Application:
★ Power
◇ Conventional Steam
◇ Combined Cycle
◇ Concentrated Solar Power (CSP)
◇ Biomass & MSW
◇ Geothermal
★ Chemicals
◇ Basic (Organic & Inorganic)
◇ Specialty (Fine & Consumer)
◇ Biofuels
◇ Pharmaceutical
◇ Petrochemicals
★ Water
◇ Water Management
◇ Desalination
★ Oil & Gas
◇ Upstream Exploration & Production
◇ Midstream Transportation
◇ Downstream Processing
★ General Industries
◇ Pulp & Paper
◇ Mining
◇ Food & Beverage
◇ Corn Wet Milling & Ethanol
◇ Other Industries
Available ANSI Pump Model List:
| G series avaliable list (Gould's 3196 equivalent) | D series avaliable list (Durco Mark III equivalent) |
| 1x1.5-6 | 1.5x1-62 |
| 1x1.5-8 | 1.5x1-82 |
| 1x1.5LF-8 | 1.5x1LF-82 |
| 1.5x3-6 | 3x1.5-62 |
| 1.5x3-8 | 3x1.5-82 |
| 2x3-6 | 3x2-62 |
| 2x3-8 | 3x2-82 |
| 3x4-8 | 4x3-82 |
| 3x4-8G | 2x1-10A |
| 1x2-10 | 3x1.5-10A |
| 1x2LF-10 | 3x2-10 |
| 1.5x3-10 | 3x2-10A |
| 2x3-10 | 4x3-10 |
| 3x4-10 | 4x3-10H |
| 3x4-10H | 6x4-10 |
| 4x6-10 | 6x4-10H |
| 4x6-10H | 3x1.5-13 |
| 1.5x3-13 | 3x2-13 |
| 1.5x3LF-13 | 4x3-13 |
| 2x3-13 | 4x3-13HH |
| 3x4-13 | 6x4-13A |
| 4x6-13 | 8x6-14A |
| 6x8-13 | 10x8-14 |
| 8x10-13 | 10x8-16 |
| 8x10-15 | 6x4-16 |
| 8x10-15G | 8x6-16 |
| 6x8-15 | 8x6-16 |
Copy Right: Sunbo Machinery | Sitemap
Disclaimer: We don't represent or is not in anyway affiliated with Warman®, Metso®, Goulds®, Durco®, Andritz®, Mission® and other brand names, all these brand names are respected of their owners. Any brand name, model, number, symbols or any descriptions are used for reference purpose only, and do not imply that any part or pump listed is the product of Warman® , Metso®, Goulds®, Durco®,Andritz®, and Mission®. Our pump and spare parts interchangeable only.
English 
عربى
Français
Español
Pусский
